top of page

THE MACHINES

HAAS VF-2
Vertical Machining Center; 30" x 16" x 20" (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapids, power-failure detection module, 1 GB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system.
HAAS VF-6
Vertical Machining Center; 64" x 32" x 30" (1626 x 813 x 762 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 24+1 side-mount tool changer, 600 ipm (15.2 m/min) rapids, automatic chip auger, programmable coolant nozzle, color remote jog handle, power-failure detection module, 1 GB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 95-gallon (360 liter) flood coolant system.
HAAS TL-1
CNC Toolroom Lathe; 16" x 30" (406 x 762 mm) max capacity, chip enclosure, 20" (508 mm) swing, 12 hp (8.9 kW) vector drive, 2000 rpm, A2-6 spindle, Intuitive Programming System, coolant pump, 1 MB program memory, memory lock keyswitch, air blow gun, 15" color LCD monitor and USB port. No workholding, toolpost, or toolholders included.
HAAS VF-0

Table Working Surface............................. 30" x 14"
Table Load Capacity............................... 3,000 LBS
Longitudinal Travel (X-Axis)...................... 20"
Cross Travel (Y-Axis)............................. 16"
Vertical Travel (Z-Axis).......................... 20"
Maximum Clearance Table Top to Spindle Nose....... 24"
Feed Rates, All Axes.............................. 0 to 300 IPM
Rapid Traverse Rate, All Axes..................... 710 IPM
Tool Storage Capacity............................. 20
Spindle Horsepower................................ 15 HP
Spindle Speeds Range.............................. 0-7500 RPM
Spindle Taper..................................... No. 40 CAT (V-Flange)
Approximate Machine Dimensions.................... 92" x 88"
Approximate Machine Height........................ 104"
Approximate Machine Weight........................ 8,000 LBS

Proto Trak Lathe (not actual photo)

ProtoTRAK CNC ModelSLXHeight of Centers9"

Distance between centers45"Swing over bed18.1"

Swing Over Saddle Wings17"Swing Over Cross Slide9.13"

Cross Slide Travel10.6"Tool Section Max1"

Coolant Tank Capacity13 gal.Width Of Bed13.4"

Height Of Bed12.4"Spindle NoseD1-6

Spindle Through Hole2.36"Spindle TaperMT#6

Taper In Reduction SleeveMT#4Spindle Dia At Front Bearing3.35"

Number Of Bearings2Spindle Speed Range RPM

Number Of Speeds2TailstockStandard

Quill Travel6"Quill Diameter2.56"

Quill Taper HoleMT#4Spindle Motor HP10

Power Requirements, Control110V; 1P; 12APower Requirements, Machine220V; 3P; 60Hz

Amps Full Load Current33Dimensions Net94" x 52" x 73"

Dimensions Shipping91" x 52" x 84"Weight Net3285 lbs.

Weight Shipping3800 lbs.Maximum Rapid Feed X (IPM)100

Maximum Rapid Feed Z (IPM)250Coolant Pump Motor HP1/8 HP

Spindle Motor BrakeDynamic BrakingWay Surface Hardness480 - 560 HB

Head Stock LubricationOil Bath

bottom of page